News

  • News General

    SUBMERSIBLE PRESSURE TRANSDUCER

    May 11, 2006 by Staff Setra Systems, Inc. has introduced the model 595 digitally compensated submersible pressure transducer. The model’s integral specific gravity compensation makes the unit suitable for groundwater monitoring, sewer flow monitoring, storm water studies, stream flow monitoring, infiltration/inflow studies, pump tests, irrigation,…
    Read more →
  • News General

    MICRO COAX CONNECTOR SYSTEM FOR MOBILE APPLICATIONS

    May 11, 2006 by Staff A series of 0.40 mm pitch Micro Coax connectors from Molex Inc. are said to offer increased space savings and improved signal integrity for mobile device applications. Initially designed to run signaling through the hinge area of new swivel-type cell phones with rotating LCDs, the Micro Coax connector system is now finding use in applications such as notebook PCs that require flexible circuit routing, shielding, higher speeds and additional space savings. The connector system features an Insulation Displacement Technology (IDT) method used to terminate the centre conductor of 42 AWG coaxial cable.
    Read more →
  • News General

    GAS MASS FLOW CONTROLLERS

    May 11, 2006 by Staff McMillan Model 80 series mass flow controllers for gas measurement are available in stainless steel construction. The controllers are said to provide accurate, stable control of gas flow ranges as low as 0 to 50 sccm. Units are also available…
    Read more →
  • News General

    COMPACT BRUSH DC MOTOR HAS PEAK TORQUE UP TO 150 OZ IN.

    May 11, 2006 by Staff Brush dc motor from Magmotor suitable for X-Y positioning systems, medical equipment, pharmaceutical equipment, machine tool spindles and centrifuge applications, has the ability to accelerate rapidly with limited impact to the system. It features internal brushes and Nd magnets. The…
    Read more →
  • News General

    CUSTOM SHAPED ROLLERS AND PINS

    May 11, 2006 by Staff Hartford Technologies has announced pins and rollers for applications in automotive, industrial and electronics markets, including CV joints, locating pins, linear track rollers, bearings and fractional motor shafts. Rollers and pins are available in diameters ranging from 1 to 20…
    Read more →
  • News General

    SIGNAL CONDITIONING INSTRUMENTATION

    May 11, 2006 by Staff Daytronic Corp. has announced a line of programmable signal conditioning instruments. The 5D module is a self-contained, configurable instrument. With pluggable screw-terminal connectors for installation and I/O field wiring, it can be used as an individual or "in-line" signal conditioner…
    Read more →
  • News General

    HIGH-VOLTAGE SIP REED RELAY

    May 11, 2006 by Staff Coto Technology has introduced the second generation of its 9104 Series Reed Relay – a SIP reed relay featuring switching capability up to 1000 Vdc/ac peak. In the normally-open contact state, dielectric strength is greater than 2000 Vdc/ac peak. The…
    Read more →
  • News General

    COMPACT, LOW-INERTIA SERVO MOTORS

    May 11, 2006 by Staff Rockwell Automation has announced the addition of two frame sizes to the Allen-Bradley MP-Series Low Inertia servo motor line. The MP-Series Small Frame servo motors are dynamic motors with environmentally sealed connectors. Available in two frame sizes – 63 and…
    Read more →
  • News General

    LARGE FORMAT COLOR PRINTERS

    May 11, 2006 by Staff Oc√ÉÀÜ has introduced the Oc√ÉÀÜ CS2044 and Oc√ÉÀÜ CS2024 large format color print systems. The low volume systems, with printing widths of 44 and 24 in. respectively, are said to produce consistently crisp, clear line drawings and brilliant color graphics,…
    Read more →
  • News General

    HEAVY-DUTY SPLICE ACCOMMODATES 16-14 AWG SIGNAL WIRE

    May 2, 2006 by Staff Tyco Electronics recently introduced a heavy-duty electrical wire in-line splice suitable for 16-14 AWG that accommodates the large wire insulation thickness often found in the rail industry. The splice is suitable for signal wires up to .250 in. thick. The splice is part of Tyco Electronics' PIDG line of insulated splices and is terminated with standard tooling.
    Read more →