Design Engineering

Vision Sensors

By Design Engineering staff   

Automation Machine Building Teledyne DALSA vision sensor

Teledyne DALSA’s BOA Spot ID vision sensors combine 1D and 2D code reading with OCR and verification.

16-oct-dalsa-camera-625Teledyne DALSA released its BOA Spot ID vision sensors, which combines 1D/2D code reading with OCR and verification tools. The BOA Spot ID is available in two models. A standard IDS model includes the core 1D/2D decoders, while the expanded IDE model adds advanced Direct Part Marking (DPM) decoding, OCR and verification tools. These new vision sensors can decode 1D barcodes with bar widths and spacing down to 1.5 pixels; and 2D matrix codes with cell or dot sizes down to 2 pixels. The series integrates LED lighting, lens cover and software, plus an IP67 rating.Inspections using the series can be triggered by parts in motion or from a PLC after being moved into a stationary position. Ethernet/IP and PROFINET are directly supported for communicating with 3rd party equipment.


Stories continue below

Print this page

Related Stories