S. Himmelstein and Company has announced MCRT 48200V series digital torquemeters. The non-contact devices have full scale ranges from 25 to 10,000 lbf in. Units provide ±10 V or ±5 V output analogs of torque, as well as engineering unit data via a resident com port. Two accuracy grades are offered: 0.2% and 0.15%.

0 February 1, 2008

The torque transducers have no pots or switches and don’t require any manual adjustments. Calibration values, scaling and units of measure are stored in nonvolatile memory and automatically loaded on power up. Internal signal processing is accurate to 14 bits.

Select from any of ten supported units of measure without recalibration. Other features include inherent noise tolerance, high overload capacity, high over range, NIST traceable bi-directional calibration, selectable signal filters and inclusion of PC interface software.

The software will display engineering unit current, peak, valley and spread data, classify limits and do real time plotting. It can also be used to change units of measure, select ±5 or ±10 Volt analog output, select signal filters, archive calibration history, save data to disk and store test setup parameters. Units are shipped with an NIST traceable calibration performed in an NVLAP accredited metrology laboratory (Lab Code 200487).

Leave a Reply

Your email address will not be published. Required fields are marked *